diff --git a/vmess-sk5.sh b/vmess-sk5.sh
new file mode 100644
index 0000000..f387854
--- /dev/null
+++ b/vmess-sk5.sh
@@ -0,0 +1,270 @@
+#!/bin/bash
+
+red='\e[31m'
+yellow='\e[33m'
+green='\e[32m'
+none='\e[0m'
+config_file="/usr/local/etc/xray/config.json"
+default_config='
+{
+  "inbounds": [
+    {
+        "listen": "127.0.0.1",
+        "port": 9999,
+        "protocol": "vmess",
+        "settings": {
+            "clients": [
+                {
+                    "id": "sky22333"
+                }
+            ]
+        },
+        "streamSettings": {
+            "network": "ws",
+            "security": "none",
+            "wsSettings": {
+                "path": "/sky22333"
+            }
+        },
+        "tag": "inbound0"
+    }
+  ],
+  "outbounds": [
+    {
+        "protocol": "socks",
+        "settings": {
+            "servers": [
+                {
+                    "address": "127.0.0.2",
+                    "port": 2222,
+                    "users": [
+                        {
+                            "user": "admin123",
+                            "pass": "admin333"
+                        }
+                    ]
+                }
+            ]
+        },
+        "tag": "outbound0"
+    }
+  ],
+  "routing": {
+    "rules": [
+    {
+        "type": "field",
+        "inboundTag": ["inbound0"],
+        "outboundTag": "outbound0"
+    }
+    ]
+  }
+}
+'
+
+# 检查并安装curl
+check_and_install_curl() {
+    if ! type curl &>/dev/null; then
+        echo -e "${yellow}正在安装curl...${none}"
+        apt-get update && apt-get install -yq curl
+    fi
+}
+
+# 检查并安装jq
+check_and_install_jq() {
+    if ! type jq &>/dev/null; then
+        echo -e "${yellow}正在安装jq...${none}"
+        apt-get update && apt-get install -yq jq
+    fi
+}
+
+# 检查并安装uuid-runtime
+check_and_install_uuid_runtime() {
+    if ! type uuidgen &>/dev/null; then
+        echo -e "${yellow}正在安装 uuid-runtime...${none}"
+        apt-get update && apt-get install -yq uuid-runtime
+    fi
+}
+
+# 检查并安装xray
+check_and_install_xray() {
+    if ! type xray &>/dev/null; then
+        echo -e "${yellow}正在安装 xray...${none}"
+        bash -c "$(curl -L https://github.com/XTLS/Xray-install/raw/main/install-release.sh)" @ install
+    fi
+}
+
+# 检查是否已存在入站配置
+check_existing_inbound_config() {
+    if grep -q '"tag":' "$config_file"; then
+        return 0  # 已存在入站配置
+    else
+        return 1  # 不存在入站配置
+    fi
+}
+
+# 创建默认配置文件
+create_default_config() {
+    if ! check_existing_inbound_config; then
+        echo "$default_config" > "$config_file"
+        echo -e "${green}已创建默认配置文件。${none}"
+    else
+        echo -e "${yellow}入站配置已存在，跳过创建默认配置文件。${none}"
+    fi
+}
+
+# 获取本机公网 IP
+get_local_ip() {
+    local ip=$(curl -s http://ipinfo.io/ip)
+    if [[ $ip =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+        echo "$ip"
+    else
+        echo "无法自动获取公网IP地址，请手动输入。"
+        read -p "请输入您的公网IP地址: " manual_ip
+        if [[ $manual_ip =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+            echo "$manual_ip"
+        else
+            echo "输入的IP地址格式不正确，请重新运行脚本并输入有效的公网IP地址。"
+            exit 1
+        fi
+    fi
+}
+
+# 显示所有入站配置和 Vmess 链接以及对应的出站配置（出战只显示地址、端口、用户名和密码）
+show_inbound_configs() {
+    local local_ip=$(get_local_ip)  # 获取本机IP
+
+    local config=$(jq '.inbounds | map(select(.port != 9999))' "$config_file")
+    local outbounds=$(jq '.outbounds' "$config_file")
+    echo -e "${green}入站节点配置:${none}"
+
+    local length=$(jq '. | length' <<< "$config")
+    for ((i = 0; i < length; i++)); do
+        local port=$(jq -r ".[$i].port" <<< "$config")
+        local id=$(jq -r ".[$i].settings.clients[0].id" <<< "$config")
+        local path=$(jq -r ".[$i].streamSettings.wsSettings.path" <<< "$config")
+
+        # 将节点地址设置为本机IP
+        local node_address="$local_ip"
+
+        local vmess_link="vmess://$(echo -n "{\"v\":\"2\",\"ps\":\"节点$(($i + 1))\",\"add\":\"$node_address\",\"port\":$port,\"id\":\"$id\",\"aid\":0,\"net\":\"ws\",\"path\":\"$path\",\"type\":\"none\"}" | base64 -w 0)"
+
+        echo -e "${yellow}节点: $(($i + 1))${none} - 端口: ${port}, Vmess 链接: ${vmess_link}"
+        
+        # 构造出站配置的标签
+        local outbound_tag="outbound$port"
+
+        # 根据构造的标签查找对应的出站配置
+        local outbound_config=$(jq --arg tag "$outbound_tag" '.[] | select(.tag == $tag) | .settings.servers[] | {address, port, user: .users[0].user, pass: .users[0].pass}' <<< "$outbounds")
+        
+        if [[ ! -z $outbound_config ]]; then
+            echo -e "${green}出站配置:${none} 地址: $(jq -r '.address' <<< "$outbound_config"), 端口: $(jq -r '.port' <<< "$outbound_config"), 用户名: $(jq -r '.user' <<< "$outbound_config"), 密码: $(jq -r '.pass' <<< "$outbound_config")"
+        else
+            echo -e "${red}未找到对应的出站配置。${none}"
+        fi
+    done
+}
+
+# 添加新节点
+add_new_nodes() {
+    read -p "请输入要添加的节点数量: " num_nodes
+    if ! [[ $num_nodes =~ ^[0-9]+$ ]]; then
+        echo -e "${red}错误!${none} 请输入有效的数量。\n"
+        return
+    fi
+
+    local max_port=$(jq '[.inbounds[].port] | max // 10000' "$config_file")
+    local start_port=$((max_port+1))
+
+    for ((i=0; i<num_nodes; i++)); do
+        local new_port=$((start_port+i))
+        local new_tag="inbound$new_port"
+        local new_outbound_tag="outbound$new_port"
+        local new_id=$(uuidgen)
+
+        # 用户输入出站代理信息
+        echo "配置第 $((i+1)) 个sk5出站 (入站端口是$new_port)"
+        read -p "请输入socks5出站地址, 端口, 用户名, 密码 (按顺序以空格分隔): " outbound_addr outbound_port outbound_user outbound_pass
+
+        # 添加入站配置（入站地址设置为 "0.0.0.0"）
+        jq --argjson port "$new_port" --arg id "$new_id" --arg tag "$new_tag" '
+        .inbounds += [{
+            listen: "0.0.0.0",
+            port: $port,
+            protocol: "vmess",
+            settings: { clients: [{ id: $id }] },
+            streamSettings: { network: "ws", security: "none", wsSettings: { path: "/websocket" } },
+            tag: $tag
+        }]' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+
+        # 添加出站配置
+        jq --arg tag "$new_outbound_tag" --arg addr "$outbound_addr" --argjson port "$outbound_port" --arg user "$outbound_user" --arg pass "$outbound_pass" '
+        .outbounds += [{
+            protocol: "socks",
+            settings: { servers: [{ address: $addr, port: $port, users: [{ user: $user, pass: $pass }] }] },
+            tag: $tag
+        }]' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+
+        # 添加路由规则
+        jq --arg inTag "$new_tag" --arg outTag "$new_outbound_tag" '
+        .routing.rules += [{ type: "field", inboundTag: [$inTag], outboundTag: $outTag }]
+        ' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+    done
+
+    echo -e "${green}已成功添加 $num_nodes 个节点。${none}"
+    systemctl restart xray
+    echo -e "${green}Xray 服务已重新启动。${none}"
+}
+
+# 删除特定端口号的节点
+delete_node_by_port() {
+    read -p "请输入要删除的vmess节点端口号: " port_to_delete
+    if ! [[ $port_to_delete =~ ^[0-9]+$ ]]; then
+        echo -e "${red}错误!${none} 请输入有效的端口号。\n"
+        return
+    fi
+
+    local inbound_tag="inbound$port_to_delete"
+    local outbound_tag="outbound$port_to_delete"
+
+    # 删除入站配置
+    jq --argjson port "$port_to_delete" 'del(.inbounds[] | select(.port == $port))' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+
+    # 删除出站配置
+    jq --arg tag "$outbound_tag" 'del(.outbounds[] | select(.tag == $tag))' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+
+    # 删除路由规则
+    jq --arg inTag "$inbound_tag" --arg outTag "$outbound_tag" 'del(.routing.rules[] | select(.inboundTag[] == $inTag and .outboundTag == $outTag))' "$config_file" > "$config_file.tmp" && mv "$config_file.tmp" "$config_file"
+
+    echo -e "${green}已成功删除端口号为 $port_to_delete 的节点。${none}"
+    systemctl restart xray
+    echo -e "${green}Xray 服务已重新启动。${none}"
+}
+
+# 主菜单
+main_menu() {
+    while true; do
+        echo -e "\n${green}sky22333-快速批量搭建二级代理脚本-管理菜单:${none}"
+        echo "1. 查看所有节点"
+        echo "2. 新增vmess入站sk5出站"
+        echo "3. 删除节点"
+        echo "4. 退出"
+        read -p "请输入选项: " choice
+
+        case $choice in
+            1) show_inbound_configs ;;
+            2) add_new_nodes ;;
+            3) delete_node_by_port ;;
+            4) break ;;
+            *) echo -e "${red}无效的选项，请重新选择。${none}" ;;
+        esac
+    done
+}
+
+# 调用主菜单函数
+check_and_install_curl
+check_and_install_jq
+check_and_install_uuid_runtime
+check_and_install_xray
+create_default_config
+get_local_ip
+main_menu